Smps Power Adapter 5v 2a,Wall Switch Power Supply,Led Power Supply Class 2 Power Units,12vdc DesktopCo., Ltd. , http://www.chdesktopadapter.com
Tamper Evident Labels stay on guard letting you or your customers know about unwanted access, opening or tampering.
Application:
• Safety warning labels • Licensing labels and tags • Warranty seals • Calibration seals • Package seals • Asset labels • Tamper evident labels
Application Techniques :
Determining :
The tamper-indicating mechanism (i.e. the facestock destruction)
Suitability depends upon adequate adhesion of the label to the substrate. A sufficient bond may not develop on all surfaces due to low surface energy (e.g. PTFE), contaminated or textured surfaces. Therefore, it is important to determine the suitability of the product in the intended application by carefully pre-testing.
Dispensing :
Care should be taken not to disturb or knick the facestock when manually removing the label from the liner. Slowly remove the liner from the label at a 90° angle.
Surface Preparation :
Assume all surfaces to which these label materials will be applied are contaminated - metals may be oily or dusty, plastics may be coated with mold release agents, dirt, etc. Any surface contaminant will adversely affect adhesion and the ability to destruct: therefore, contaminants must be removed prior to application by wiping with a solvent such as isopropyl alcohol. Consult the manufacturer's Material Safety Data Sheet for proper handling and storage of solvents.
Application Pressure:
Application, temperature, pressure, and dwell time are all important variables to product adequate adhesion and assure the label fractures when removal or tampering is attempted. For best results, the label should be applied when all materials are over 50°F (10°C). Higher initial bonds can be achieved through increased application pressure (firm hand or squeegee pressure should be sufficient). The bond will increase in time, depending on the substrate. Metals and high surface energy materials will develop bonds faster than low surface energy materials.
Customized orders welcome.
Brief information about us :
Founded in 1996, Canning has been engaging in packaging and printing industry for 22 years.
We have complete ISO9001 quality system and ISO14000 environment system,ensure product quality and environmental protection requirements at the international advanced level.
Our Capability :
Pre-printing service (graphic design, packaging design, structure design, digital proofing);
Printing service (digital printing, offset printing, silk-screen printing, letterpress printing);
Post-printing service (folding, saddle stitch, binding, surface coating, die cut).
Our product made by advanced technique and technology:
1. Custom's logo and design is acceptable.
2. Label With certification of the UL, CSA
3. Custom project is highly welcomed.
    We have experienced design,produce, quality checking, shipping and after sale department.
4. We can help suggest the most correct material, produce arts based on customers requirement to ensure the products can totally meet up with our customers standard.
5. Nontoxic, eco-friendly, RoHS
6. Waterproof, anti-oil, anti-friction, Permanent or removable adhesive; Resistant high &Â low temperature;Tearproof
7. Provide best price, high quality and short delivery time.
8. OEM is welcomed
Our Service:
1. Goods will be ready within 7-10 days after receiving the payment.
2. Existing samples can be prepared within 3Â days free of charge. Buyer is only responsible for the shipping cost.
   Custom samples would be available within 7 days. Buyer is responsible for paying sample and shipping costs, which will be deducted from mass production.
3. Pictures or the producing process will be send to you then.
If you choose way of express-ready product pictures and tracking number will be provided to you after goods dispatched.
4. Our products are exported to Europe, North America, South America, Africa, many countries in Asia, all the world.
Good after-sale service offered, please get back if you get question.
Our products:
1. Sticker labels :Â Various self-adhesive labels, roll label, printed labels, serial number stickers, bar code labels, thermal labels, transparent labels, PVC/PC/PET/PP plastic labels, gold/silver foil label, laser labels, removable labels, price tags Crystal epoxy sticker, epoxy dome sticker, PU dome sticker, cartoon sticker, laser sticker, window sticker, static sticker, glitter sticker, fluorescent sticker, nail sticker, mobile phone sticker, 3D sticker, gold/silver trim sticker, PVC/PC/PET plastic stic; etc.
2. Die-cutting:Â Â Verious electronic auxiliary materials, die-cutting various adhesive, foam, Flame retardant Mylar film,EMI Gasket,Mesh,protective PET film, poly bubble, woven fabric, non-woven fabric, insulating material,, etc.
2. Name plate: PMMA overlay, PC nampe plate, Icon label, PMMA Lens, etc.
3. Offset printing: Art paper color printing, Poster, Brochure, Manual, Business cards, Booklets, etc.
Factory Photo:
Â
Peace of mind you can readily see and demonstrate
Tamper Evident Labels stay on guard letting you or your customers know about unwanted access, opening or tampering.
Application:
• Safety warning labels • Licensing labels and tags • Warranty seals • Calibration seals • Package seals • Asset labels • Tamper evident labels
Application Techniques :
Determining :
The tamper-indicating mechanism (i.e. the facestock destruction)
Suitability depends upon adequate adhesion of the label to the substrate. A sufficient bond may not develop on all surfaces due to low surface energy (e.g. PTFE), contaminated or textured surfaces. Therefore, it is important to determine the suitability of the product in the intended application by carefully pre-testing.
Dispensing :
Care should be taken not to disturb or knick the facestock when manually removing the label from the liner. Slowly remove the liner from the label at a 90° angle.
Surface Preparation :
Assume all surfaces to which these label materials will be applied are contaminated - metals may be oily or dusty, plastics may be coated with mold release agents, dirt, etc. Any surface contaminant will adversely affect adhesion and the ability to destruct: therefore, contaminants must be removed prior to application by wiping with a solvent such as isopropyl alcohol. Consult the manufacturer's Material Safety Data Sheet for proper handling and storage of solvents.
Application Pressure:
Application, temperature, pressure, and dwell time are all important variables to product adequate adhesion and assure the label fractures when removal or tampering is attempted. For best results, the label should be applied when all materials are over 50°F (10°C). Higher initial bonds can be achieved through increased application pressure (firm hand or squeegee pressure should be sufficient). The bond will increase in time, depending on the substrate. Metals and high surface energy materials will develop bonds faster than low surface energy materials.
Customized orders welcome.
Brief information about us :
Founded in 1996, Canning has been engaging in packaging and printing industry for 22 years.
We have complete ISO9001 quality system and ISO14000 environment system,ensure product quality and environmental protection requirements at the international advanced level.
Our Capability :
Pre-printing service (graphic design, packaging design, structure design, digital proofing);
Printing service (digital printing, offset printing, silk-screen printing, letterpress printing);
Post-printing service (folding, saddle stitch, binding, surface coating, die cut).
Our product made by advanced technique and technology:
1. Custom's logo and design is acceptable.
2. Label With certification of the UL, CSA
3. Custom project is highly welcomed.
    We have experienced design,produce, quality checking, shipping and after sale department.
4. We can help suggest the most correct material, produce arts based on customers requirement to ensure the products can totally meet up with our customers standard.
5. Nontoxic, eco-friendly, RoHS
6. Waterproof, anti-oil, anti-friction, Permanent or removable adhesive; Resistant high &Â low temperature;Tearproof
7. Provide best price, high quality and short delivery time.
8. OEM is welcomed
Our Service:
1. Goods will be ready within 7-10 days after receiving the payment.
2. Existing samples can be prepared within 3Â days free of charge. Buyer is only responsible for the shipping cost.
   Custom samples would be available within 7 days. Buyer is responsible for paying sample and shipping costs, which will be deducted from mass production.
3. Pictures or the producing process will be send to you then.
If you choose way of express-ready product pictures and tracking number will be provided to you after goods dispatched.
4. Our products are exported to Europe, North America, South America, Africa, many countries in Asia, all the world.
Good after-sale service offered, please get back if you get question.
Our products:
1. Sticker labels :Â Various self-adhesive labels, roll label, printed labels, serial number stickers, bar code labels, thermal labels, transparent labels, PVC/PC/PET/PP plastic labels, gold/silver foil label, laser labels, removable labels, price tags Crystal epoxy sticker, epoxy dome sticker, PU dome sticker, cartoon sticker, laser sticker, window sticker, static sticker, glitter sticker, fluorescent sticker, nail sticker, mobile phone sticker, 3D sticker, gold/silver trim sticker, PVC/PC/PET plastic stic; etc.
2. Die-cutting:Â Â Verious electronic auxiliary materials, die-cutting various adhesive, foam, Flame retardant Mylar film,EMI Gasket,Mesh,protective PET film, poly bubble, woven fabric, non-woven fabric, insulating material,, etc.
2. Name plate: PMMA overlay, PC nampe plate, Icon label, PMMA Lens, etc.
3. Offset printing: Art paper color printing, Poster, Brochure, Manual, Business cards, Booklets, etc.
Factory Photo:
Â
Color Printing Tamper-Evident Label Security Label
Model NO.: canning_label_000033
Transport Package: Personal
Specification: Customized
Origin: China
Model NO.: canning_label_000033
Transport Package: Personal
Specification: Customized
Origin: China
Peace of mind you can readily see and demonstrate