The peelable ink can effectively cover the printed and written text and patterns, etc. After the ink is dried, the ink layer can be removed as needed to reproduce the original text and patterns, and the original pictures and text are still clearly reproduced As always. 1. Features and uses (1) The agent has strong covering power, and it is impossible to see through the covered characters and patterns with the naked eye, that is, it has strong confidentiality. (2) After the covering layer of this agent is removed, the original picture and text are very clear. The quality of the original image and text will not be affected by the cover layer. (3) The cover layer is easy to remove. Just pull off a corner of the cover layer to remove it completely. This agent is mainly used for confidential documents, information, lottery tickets, etc. It can also be used for games and entertainment. 2. Raw materials (1) For ethylene-vinyl acetate copolymers, see 16 (the main raw material of this agent. Use industrial products.) New type of writing masking liquid. (2) Xylene "target = _blank> xylene see five (9) multifunctional paint remover" target = _blank> paint remover Used as a solvent in this agent. Use industrial products. (3) Toluene see the sixth middle (seven) nitrile rubber adhesive. Used as a solvent in this agent. Use industrial products. (4) Titanium dioxide see one in <11) powdery eyeshadow block. Used as a filler in this agent. Use rutile titanium dioxide. (5) For ferric oxide, see seven (8) epoxy resin anticorrosive coatings. Used as a coloring agent in this agent. Use industrial products. (6) For aluminum powder, see Seventh (eight) epoxy resin anticorrosive paint. Used as filler and colorant in this agent. Use industrial products. (7) See No. 2 in silica (eight) for removing calculus and toothpaste. Used as a filler in this agent. Use colloidal silica. 3. formula The formula is shown in Table 16-2. Table 16-2 Formable ink formula (kg) │Content \ Formulation Number Recipe 1 Recipe 2 │Raw materials— │Ethylene-vinyl acetate copolymer (45%) │2.0││ │Ethylene-vinyl acetate copolymer (40%) │_│1.2.2│ │Xylene│18││ │Toluene││20．8│ │Titanium dioxide│7.2.14.0│ │Ferric oxide 8.0│9│ │Aluminum powder│4.0│4.00│ │Silica (colloid) │0.8││ 4. Preparation and use method Recipe one preparation. Dissolve the ethylene-vinyl acetate copolymer (45%) in the xylene solvent, add the titanium dioxide powder, ferric oxide, aluminum powder, and colloidal blue after stirring and mixing; material. Preparation of formula two. Dissolve ethylene-vinyl acetate copolymer (40%) in toluene solvent, add titanium dioxide powder and aluminum powder after stirring and mixing, and grind for 8 to 20 hours with a ball mill. When in use, the agent is screen-printed (or gravure printing method), and the printing is covered on the characters printed in advance by offset printing. After the natural drying solvent volatilizes, a cover is formed. Sofa Sets,sofa set for living room,recliner sofa set,leather sofa set Guangzhou LoPhiDa Co.Ltd , https://www.gdwidinlsa.com