Hot stamping (lettering), hot stamping, commonly known as "hot stamping", has a long history in China. Refers to the text and pattern of materials such as colored foil on the cover 1 or cover 4 of the hardcover book cover and the back part of the book, or embossed various convex and concave book names or patterns by hot pressing method. Today, many express printing companies are also using different types of hot stamping technology. Cold stamping: It is not necessary to use a heated metal printing plate, but to transfer the metal foil using the printing adhesive method. The cold stamping process has a low cost, saves energy, and has high production efficiency. It is a promising new process. Concavo-convex hot stamping (also known as three-dimensional hot stamping): using modern engraving technology to make the upper and lower matching female and male molds, hot stamping and pressing concave and convex processes are completed at one time, improving production efficiency. The mold made by electric engraving can be curved surface transition to achieve a three-dimensional relief effect that is difficult to achieve by the mold made by the general corrosion method. The appearance of uneven hot stamping makes the hot stamping and embossing processes complete at the same time, reducing the process and waste products caused by inaccurate overprinting. Holographic logo: computer technology is used to change the amplitude and frequency of the grating to make its effect more vivid and clearer than the calculated color of the pattern. If this kind of holographic mark is used as a copy of the original, a large amount of holographic loss will occur, so as to achieve the purpose of anti-counterfeiting. According to the characteristics of hologram hot stamping, it can be divided into continuous holographic stamping and independent holographic stamping. Continuous holographic logo hot stamping is a replacement for ordinary laser holographic hot stamping. The independent holographic logo hot stamping is to make the holographic logo on the anodized aluminum into individual logo patterns, and there are alignment marks beside each pattern. The holographic logo can not only have very good anti-counterfeiting performance, but also can make special numbers or words into the holographic logo according to customer needs. The holographic logo is hot stamped onto the packaging carton. Not only should the holographic logo be hot stamped onto the surface of the substrate, but also a very high overprint accuracy. It is more and more widely used in high-end carton packaging.
Jia Teng Glass Dome has many styles and usually include a wood base. Measurements listed are the width and height of the exterior of the glass dome. Jia Teng Glass Dome can be used for watches, dolls, figurines, clocks and many other fine collectibles. The glass dome prevent your collectibles from dust. All of our products are hand-blown glass. Meanwhile, it looks nice and take some pleasure to us.
It can be widely used in hotel, restrant, home, shopping mall, office or other places you like.
Glass Dome,Glass Display Dome,Glass Dome With Base,Glass Dome Bell Jar Hejian Jia Teng Glass Products Co., Ltd. , https://www.jtglassware.com