[ Chinese wardrobe net ] The mirror is an indispensable part of every family, but for small-bedroom friends, the combination of the mirror and the wardrobe is a good way to save indoor space. In order to help friends better understand this design, below, Xiaobian will introduce you to the wardrobe push-pull mirror installation method, interested friends to come and find out! Push-pull mirror installation steps Push-pull mirror installation steps? 1. The wardrobe push-pull mirror is integrated with the wardrobe itself. It does not occupy the place. It is very convenient to use. When it is used, it can be hidden without being pushed forward. It is practical and saves space, and it does not affect the appearance. 2, the rail design can be freely telescopic rotation, stylish and beautiful, installed on the side of the cabinet to save space. The push-pull mirror is installed on the side of the cabinet. When used, the cabinet is rotated 90 degrees to the front to save space. It can be easily pushed in without using it, and the cabinet is close to the cabinet, which saves and utilizes space. 3, aluminum alloy frame, the frame is equipped with a white seal to prevent the mirror from loosening, the corner of the frame can not see the gap. The push-pull type is practical and convenient. It can be used only by pulling the mirror frame. When the mirror is not in use, it can return to the original position in time, effectively protecting the mirror and saving the space of the wardrobe. Push-pull mirror installation steps? wardrobe push-pull mirror installation method First take out the mirror and point out the position where the wardrobe needs to be installed to draw the horizontal reference line; use the cross/slotted screwdriver to install the upper rail. It should be noted that the screw should not be installed too tightly, just fix it on top; continue to use The cross/slotted screwdriver is installed with the following guide rails. You need to adjust the upper and lower positions to place the mirror, and finally fix the bottom. Tighten all the screws and install them. Test whether the movement of the mirror is smooth. If it is not smooth, it is recommended to adjust the position of the upper and lower rails. It is recommended to clean the surface regularly with clean water or mild detergent and then dry it with a soft towel. To keep the appearance smooth and bright, do not use vinegar or hydrochloric acid-based cleaners. Avoid hard objects scratching the surface of the product. Never use a rough cloth. Do not use in contact with organic solvents and corrosive chemicals, or in a gaseous environment with the above substances, so as not to damage the surface coating and affect the brightness of the coating. The above is the installation method of the wardrobe push-pull mirror introduced by Xiaobian, I hope to help the friends who have the needs. The wardrobe installation sliding door not only increases the practical function of the wardrobe, but also the wardrobe product of this design can save the indoor space better, especially suitable for small room decoration. Renovation friends can consider this design style wardrobe product.
They are modern styles that match well with any house . Super cute and bohemian style , they change ordinary into an elegant look and bring you joy for sure . Cotton plant hanger instructions , such a homie touch to your house ! Hanging plant holders are versatile , such as space saver and home decor .
Air Plant Holder,Macrame Plant Hanger,Macrame Plant Holder,Cotton Plant Holder Shandong Guyi Crafts Co.,Ltd , https://www.guyicraft.com