Inkjet printer daily use skills

With the continuous improvement of people's living standards, inkjet printers and people's lives are also increasingly close. Now, many families have purchased cheap inkjet printers. However, how to make good use of inkjet printers is a big headache for many people. In fact, as long as we pay attention to some details, we can reduce the trouble caused by printing failures; in addition, proper control of some operating techniques can also greatly improve the printing efficiency.

Speed ​​increase
In the process of using inkjet printers, sometimes we find that the printer's output speed is significantly slower than before. At this time, we may wish to execute the "settings"/"printer" command in the system start menu. Right-click the printer icon. From the shortcut menu that opens, execute the "Properties" command. In the opened property settings box, open the "Details" tab page, and then in this page "Spool Settings" settings At this point, you can effectively increase the speed of printing by selecting the "Speed ​​up printing when background executing job" or "Print directly to printer" option.

2. Paper jam
Inkjet paper is also very easy to get stuck - especially for printers that use the frictional feed method. In addition to the paper that can't be too thin like a needle, we're here to discuss how to deal with paper jams. It's very simple and practical. The method is to immediately stop the printing, put the adjustment lever to adjust the paper thickness at the maximum, and then gently pull out, if it is very dry, it is easy to damage the printer nozzle! We also need to learn the lesson - don't put wrinkled or cracked paper on the inkjet printer.

3 boot for ink cartridge
When we reinstall the new ink cartridge for the ink jet printer with the correct procedure, if the ink out indicator on the printer control panel is still blinking and does not work properly, this phenomenon is most likely due to the improper replacement of the ink cartridge. caused. Many operators have always felt that when the printer is replaced with a new one, it seems safer to perform the replacement operation when the printer is powered off. In fact, when the printer is powered off, the printer is replaced with a new one. It will not be controlled by the inkjet printer. Approved, so the new ink cartridge that we replaced was actually the “auditor’s attention, to return” to the printer. At this point, if you want the printer to continue working normally, only turn on the printer first, and then follow the steps to reinstall the cartridge so that the printer will automatically resolve the problem by cleaning the print head.

4. Maintenance and maintenance
If the ink jet printer does not print ink at all times during operation, even if the print head is cleaned with the program supplied with the printer, this phenomenon is most likely to be blocked by the nozzles or orifices of the jets. Of course, this cannot be ruled out. Problems with the print cable or even the printer's internal circuit board. If it is the print head or the nozzle hole failure, through the random cleaning process can not let it officially work, I suggest we should not do it yourself, casually disassemble it and repair, otherwise the printer's jetting effect will be severe Impact, the correct approach is to promptly send the inkjet printer to a local technical service center for repair by a professional technician.

If, during the printing process, it was found that the ink cartridges on the ink cartridge holder could not slide freely, it would indicate that too much dust may have accumulated on the slide bars that support the ink cartridge holders, thus causing a great resistance to the smooth movement of the ink cartridges. As a result, the ink cartridge is prevented from moving properly when it is moved. At this point, we can use a soft cloth to wipe the dust on the slider that supports the cartridge holder, then apply a few drops of oil like sewing machine oil to the slider, and ensure that the lubricant can be applied evenly. Improve the printing effect.