The projectors we often see are used in enterprises. It not only facilitates the communication between the internal planning schemes, but also is an effective way to communicate with customers. Projectors are also often used for a variety of educational purposes, commercial exhibitions, and entertainment promotions. It can be seen that it is widely used. Therefore, we should treat the projector more carefully, knowing that some routine maintenance methods can be more conducive to it to bring us more visual convenience. 1: Place the position properly We all know that the office equipment we bought is expensive in terms of price, and the second is that it needs strong stability. It is also the same for projectors, so first find a stable surface to put it, and then do not block it. Ventilation slots and ventilation openings on the projector cover, and do not place on the sofa, other soft objects such as mats, causing the projector to overheat. The environment must be well ventilated and should not be placed in a closed small cabinet after use. Also pull the plug down. Remember that you cannot spill any liquid onto the projector, causing the projector to short-circuit or even damage the machine. 2: Be careful when using To understand some of the constructions in the projector, many glass products such as lenses and light sources are commonly used inside the mainframe. If you accidentally break the light source, be careful when handling it, avoid being scratched by debris, and get in touch with the dealer in time. Especially when using the ceiling, the light source cover may be dropped when it is turned on. glass shards. Be careful to prevent debris from falling into your eyes or mouth. Also, do not remove the projector immediately after use. This will cause serious burns. Before removing the lamp. Turn off the power and wait until the projector is completely cool before removing it. Also remind you not to damage the projector or subject it to any collision when it is removed. 3: Cleaning is very important Always keep an eye on the projector replacement period. Do not use it until the replacement period is reached, as this can easily cause the projector to rupture. Therefore, it is necessary to replace the new lamp as soon as possible during the replacement period. There is also a projector that needs to be cleaned inside, usually for two years. Don't wait until the internal dust is full and cause a fire or the machine is not working properly. These are the problems we often encounter, and some basic maintenance knowledge we should understand. Therefore, I hope that when you use this type of office equipment, you can use it according to the above requirements. Indoor Trampoline Park,Trampoline Park with Foam Pits,Trampoline Park with Climbing Wall,Super Jump Trampoline Park Zhejiang Egoal Playground Equipment Co., Ltd. , https://www.trampolineparks.pl