Solid wood furniture is a type of furniture that Chinese families prefer. Solid wood furniture is not only simple and atmospheric, but also has a long service life and environmental protection. However, due to the lack of relevant knowledge, many people do not know the difference between solid wood furniture and panel furniture, let alone how to choose high quality solid wood furniture. Today, Xiao Bian came to give you a detailed introduction to the skills of buying solid wood furniture, 9 points to buy a good furniture. 1. How to distinguish whether it is solid wood material? The easiest way to identify solid wood furniture is; wood grain and knots. For example, we have a solid wooden bench. If we find a knotted texture on one side of the bench, then the same texture should be on the other side. The same is true for wood grain, because solid wood furniture is derived from wood, and the knots and wood grain of wood have certain symmetry. 2. What are the common solid wood materials? There are many raw materials for solid wood furniture. The more common ones are eucalyptus, white oak, eucalyptus, eucalyptus, etc. The more expensive woods are rosewood, wenge, rosewood and so on. Due to the current mixed market in China, there is often a phenomenon of shoddy and confusing trees. Some sellers confuse the mangrove furniture with mahogany furniture in an attempt to fool consumers, and some use the panel furniture to impersonate solid wood furniture. 3. How to distinguish the quality of solid wood? Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell. 4, observe the wood with or without defects The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. 5, observe the strength of the board surface Board emphasized is finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board. Doors and drawers switch to be flexible. When veneer panel cladding and other materials, should be similar to the color of packaged product, the product surface coating does not allow wrinkled skin, sticky lacquer and drain. ?? 6, check stability and safety Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm. 7, check the interface rails and other details For solid wood furniture, details such as interface rails are essential. The group is purchased with a dovetail joint or a butterfly joint. Some larger furniture should preferably be screwed with a protective block at the corner. The solid wood furniture with better quality is more beautiful in terms of details. Therefore, the internal sliding parts of the drawers are all made of high quality metal materials, so that the solid wood furniture can last for a long time. 8, check whether the surface is smooth Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles. 9. Turn the furniture upside down to observe Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip and the buckle fastened? There are no excess glue and filler in the seams. In the current home market, the price of solid wood furniture is relatively high, which requires us to polish our eyes when purchasing solid wood furniture, and accurately find the furniture of our own, but also know its quality. In addition, Xiao Bian also warmly reminds consumers that when purchasing solid wood furniture, it is best to go to the regular store of national certification, to avoid buying three no products. Manual Coffee Grinder,Coffee Grinder,Manual Grinder,Coffee Bean Grinder Yongkang Lianyang Industry & Trade Co., Ltd , https://www.yklianyang.com