A pair of good hiking shoes can take you a long way, but of course it is very important to choose a pair of hiking shoes that suits your feet (for hiking shoes, please click here). However, do you know that different methods of tying shoelaces can be used to make hiking shoes more in line with your needs and foot shape? For example, there are tying shoelaces suitable for downhill, avoiding the toe top to the toe; Let's explain the details below: Straight thread on the same side Crossing the second part of the rope: Tighten the rope with a double knot and fasten the just instep, and hit a double knot (red arrow). The traditional knotting is that two ropes cross one circle after another. The double winding knots, as the name implies, are two rounds, which can strengthen the fixing of the rope. What are the functions of face powder? Face Powder,Makeup Setting Powder,Loose Setting Powder Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.yimeijiabeauty.com
The first part: the shoelace at the instep, according to the different foot shape, there are different binding methods. Because each person's foot shape is different, the traditional single cross strapping method will not be applicable to everyone. Today we will share with you how to find Suitable for your own foot shape and bandage way to prevent the toe head from rushing forward:
1. Instep height, foot width, high archers, or swelling of feet after walking for a long time, the applicable instep strapping method should avoid too tight foot and shoes to cause poor blood circulation, and a straight line can be used at the perforation straps of the instep Perforation method:
After putting on the shoes, tilt the tip of the toes so that the heel can fit behind the shoes. Lacing the shoelace perpendicularly into the lace perforations on the same side will allow more elastic space for the instep to move. 
2. Instep strap method with flat instep, narrow leg, low arch or shoe size If the space between the instep and the shoe is not very tight and easy to slide, use the most traditional cross-threading method:
After putting on your shoes, tilt your toes slightly so that your heels can fit behind your shoes.
Use traditional crossover techniques to tighten the laces on the upper instep (blue frame block below). 
Play is very simple:
2.1 About two lace crosses
2.2 Above the rope around the lower rope
2.3 The upper rope is wound around the lower rope again
2.4 Tighten two ropes 
The third part: the shoelaces at the ankles, the feet when fixing the downhill, when going down the hill or other situations, the toes often push forward to the front of the shoes. You can try the following bandage method, so that the original scattered power to Centered to achieve the effect of locking the ankle:
Pull the right shoelace line into all the right clasps (such as the green line in the right figure) to form a straight line. The left shoelace pulls in all the clasps on the left (such as the yellow line in the right figure) to form a straight line. 
Then cross laces, respectively, into the opposite side of the straight under the first shoe buckle under the laces. (As shown in the picture: the original right green lace crosses with the left yellow lace, penetrates into the bottom of the left yellow shoelace, and the other side does the same) 
Pull the shoelace straight up. At this time, all the pulling forces on the four outside sides will be concentrated in the center of the buckle due to the way of the banding, so as to achieve the purpose of fixing the ankle. 
Then double knot fixed 
The bow that is played twice in succession is completed 
The upper strapping teaching steps may seem complicated, but it is actually very simple. However, the shoelace method referred to this time downhill is only suitable for the middle or middle high shoes, if it is wearing low shoes, there is no way!
In fact, there are many different methods of tying shoelaces. Everyone can look online and try to tie and watch and walk to find a shoelace method that suits them best!
1. Make up is lasting. This is its most basic function, and it is also the most recognized and familiar function, because if you do not fix makeup, it is easy to spend makeup, and will also take off makeup. With powder powder, these problems will be solved.
2. Concealer. Loose powder also has a concealer effect, which can block the defects on the face that cannot be covered by liquid foundation or air cushion. It also has the function of hiding large pores. If there are prominent pores or blackheads, it can be solved by powder dispersion.
3. Absorb oil and brighten skin. The powder has a strong adsorption effect on oil. Whether it is applied on the face or hair, it can ensure the dryness of the skin and hair, without worrying about too bright oil. And its brightening effect on skin color is obvious.