Home decoration to buy flooring, ceramic tile, paint and other products is essential, but there are many products on the market, the price is diverse, it is difficult to see the good or bad of the product from the outside, good or bad, then, how to buy a good product that is satisfactory It is necessary to understand the cost structure of these products. If the selling price of the product is lower than the production cost, then such a product naturally has problems. Recently, the reporter interviewed the cost structure and production process of several types of decoration materials. Be careful with laminate flooring below 70 yuan The general family chooses more laminate flooring and solid wood composite flooring. According to Mr. Wang from the marketing department of Shengxiang Floor Beijing Headquarters, most of the substrates for the laminate flooring are made of high-density boards. They are made of fast-growing forest and then made of high-temperature and high-pressure rubber. They have high strength and resistance. Shock. The substrate is the main part of this type of floor. The floor is generally divided into four layers, the first layer is a surface wear layer composed of aluminum oxide; then the decorative layer, computer-designed wood grain decorative paper; the bottom is the substrate; the last layer is the back The board acts as a moisture barrier. Since this floor requires so many raw materials, plus the production cost (wear and tear of machinery and equipment, personnel costs, etc.), sales costs, installation costs, its price should be higher than 70 yuan per square meter, if such products Below 70 yuan, then the choice should be cautious. There is also a solid wood composite floor, which is generally composed of a three-layer structure. The outermost layer is generally made of rare tree species of 4 mm thick, which is relatively hard; the wood used in the middle and bottom layers is slightly softer than the surface, and the three layers are vertically placed to reduce the deformation of the solid wood floor. . Because the surface tree species need to use longer tree species in the growing season, the cost structure accounts for a large part of the material selection. If such products are less than 200 yuan per square meter, consumers should be careful. According to Mr. Zhao, the sales representative of Jinying Aige solid wood composite flooring, market research shows that solid wood composite flooring may become the mainstream of flooring in the future. The cost of such flooring is mainly based on the surface layer. From the intuitive point of view, the wider the board, the longer the cost. The higher the table, the higher the cost. Generally, such boards are made of more oak and are harder. The growth period has been chosen for seven or eighty years, and it has also been used for up to 300 years. Mr. Zhao said that their products are generally grown for more than 300 years. The surface is 1 meter 83 long and 19 cm wide. The pavement is very gas-filled, and the price per square meter ranges from 300 yuan to 1,000 yuan. For consumers to buy such flooring, the first thing to look at is the material, then the craft, and at the same time look at the brand. At present, the big brands that distribute the floor on the market include Golden Eagle Iger, St. Elephant, Del, Hong Nai, and Filminger. Except for matt, the brighter the tile, the better. For ceramic tiles, there are quite a few types on the market that are dazzling for consumers. According to industry insiders, in addition to matt tiles, the brighter the bricks, the better, the preferred brand in buying such products, followed by the color, price and gloss. Although consumers may not know the production process and price structure of ceramic tiles, they can get good or bad when they take two or three goods. According to Chen Jinlin, general manager of the company's ceramics market, the cost of ceramic tiles is very important. Raw materials generally include clay, ore and glaze. In the production, the clay and the ore are pulverized together, then pressed into an embryo, and glaze is added. In addition to the cost of raw materials, there are many other costs in the production process of the tiles, such as the fuel used, equipment loss, development process, testing, etc. These factors will affect the final price of the tile. For consumers to buy ceramic tiles, the most important point is the brand, because the products of the big brands are guaranteed in all aspects, such as radioactivity, water absorption, pressure resistance, etc., the big brands are also more secure to use. The products of small brands have no research and development process, and there are no various tests. Therefore, the price may be lower. However, if such products are bought, the problems will be more and the services will not keep up. Therefore, consumers are advised to buy ceramic tiles. It depends on the brand. It is understood that most of the ceramic tile products on the Beijing market are qualified, and the quality is much better than in previous years. The technical level is also improving. At present, some bricks are one meter two by one meter eight, which is better than stone. Compressive and acid resistant. The big brands on the market today are Nobel, Marco Polo, Asia, Mona Lisa and so on. Coating cost is mainly in technical content Although the main components of the coating products are pigments, thinners, additives, and binders, there are natural and chemical points. According to industry insiders, the cost of coatings is first of all raw materials, followed by high research and development costs, and good coatings contain high levels of technology. Some chemical coatings are mainly extracted from petroleum, so they contain toxic heavy metals, and some coating materials are extracted from plants, so they are environmentally friendly, but refining from plants requires high technology. According to the relevant comrades of the Love House Coatings Information Department, the coatings are classified into general chemical coatings, new chemical coatings (including acrylic coatings), and pure natural coatings. The domestic pure natural coatings are very few. The domestic 100% pure natural coatings are the ones of the love house. This is a German product. Its cost is mainly composed of scientific and technological content. Many of the main ingredients contain the latest scientific research results, such as love house. The paint can breathe very well, and the paint itself can be composted without any pollution, which is unmatched by any chemical paint. It is understood that in addition to coatings, there is also a new type of wall material on the market that is also very popular with consumers. It is different from wallpaper and paint, and can be decomposed after being installed. According to the relevant comrades of Dajin Building Materials Co., Ltd., the more environmentally friendly materials used for decoration, the better the human body, so they developed a new type of wall material, the main component is salt lake diatom mud, which can make various textures. And without adhesives, the main cost component of this product is high technology. For consumers, whether it is to buy paint or wall materials, the industry reminds that the big manufacturers big brands, high brands, high reputation, good service, all have more formal testing standards. At present, the big brand coatings on the market include Aiwulu, Libang, Dulux, Meichao and so on. round coffee table,luxury coffee table,coffee table set luxury modern,stone coffee table Kumusi (Dongguan) Furniture Co., Ltd. , https://www.coombesfurniture.com