British company Romax is a transmission technology company integrating software development and project consulting. Its tools are mainly used in the design and simulation analysis of gearboxes, bearings and power transmission systems. It is well-known in the field of transmission, and is an automotive, wind power and bearing application field. Standard analysis software. Based on the Romax tool, the virtual prototype of the transmission system was developed to design, analyze and optimize the transmission system. product description • Romax Gear Train Analysis Tool Development of gearboxes, axles and precision transmission components; addressing gear design and strength checks for various gearboxes and axles and other drive trains, bearing life prediction, synchronizer performance calculation, box structural stiffness design and strength analysis, The problem of misalignment analysis of the bevel gear of the axle housing, transmission efficiency calculation and system NVH performance prediction. Romax Designer - Module Introduction • Modeling module ♦ 3D parametric solid modeling analysis of multi-parallel shaft systems including spur/spiral bevel gears, clutches, etc. ♦ Design analysis of planetary gear systems for automotive/wind/industrial gearboxes and transmissions. Accurately predict load distribution between planetary gears • Component Analysis Module 1. Gear design, strength check, LTCA analysis ♦ Support ISO6336, AGMA2001, DIN3990 international three standards to check the gear strength ♦ Quickly optimize the design parameters of the straight/helical gear pair ♦ Calculate tooth surface contact stress and root bending stress ♦ Support for hypoid/spiral/straight bevel gear design and strength check ♦ Support the tooth orientation, tooth profile and diagonal modification of the spur gear, and optimize the shaping scheme 2. Rolling bearing contact and fatigue analysis ♦ Support various bearing life expectancy standards such as ISO281 TS16281, consider the influence of bearing misalignment, high-speed centrifugal force effect, lubricant pollutants and other factors on bearing life. ♦ Detailed analysis of roller bearings to obtain calculated values ​​such as rolling element Hertz contact stress and raceway deformation 3. Analysis of other components ♦ Spline analysis: including standard and non-standard spline modeling and strength checking, spline shaping and contact analysis ♦ Fatigue strength calculation of the shaft: including the calculation of the infinite and finite fatigue life of the shaft by ANSI, GM, DIN standards, etc. • Romax Designer - Vibration Noise Module 1. Gearbox howling analysis ♦ System mode shape calculation and 3D display ♦ System dynamic response calculation (including waterfall chart) 2. Gearbox slap noise analysis • Latest module features ♦ Concept design of transmission scheme: Modeling is carried out by means of simple and clear transmission schematic diagram, which realizes design selection and rapid simulation verification of various transmission schemes under space constraints; gear size analysis helps to determine the total layout size of gearboxes ♦ CAD interface: can support data interaction between Romax model and mainstream CAD model (CATIA/UG/PROE); early prediction of possible NVH problems ♦ Dynamic software interface: It can support the Romax model to derive multi-body dynamics model, and perform torsional vibration analysis of complete drive chain under software such as ADAMS/Simulink/Simpack. cheap dog Electronics Toys,big dog Electronics Toys,small dog Electronics Toys Ningbo XISXI E-commerce Co., Ltd , https://www.petspetstoys.com
