The printer can not handle the solution of the paper

In the frequent printing process, we often encounter the failure of the printer can not handle the paper, including multiple pages at a time, paper jams, and paper does not feed. So how do we respond to these failures? The following describes some printers can not solve the paper solution, for your reference only.

Multiple pages at a time solution

First, check whether the position of the printing paper is correct. The correct one is that the height of the paper cannot be higher than the arrow mark on the guide rail on the left side of the paper slot; secondly, check whether the paper specification meets the requirements for use: By default, the weight is 60~180. Grams of printing paper can meet the requirements, and less than 60 grams of ultra-thin printing paper, it is easy to appear at the same time into multiple pages.

The degree of curl on the surface of the paper can also result in multiple sheets of paper at a time. To do this, we must ensure that the surface of the paper is flat and smooth. If it is slightly curled, it can be flattened or slightly curled in the opposite direction. To reduce the curl of the printing paper.

In order to prevent electrostatic induction from causing multiple sheets of paper at a time, we must spread the paper in a fan-shaped manner before installing the paper to ensure that each sheet can be separated and then loaded into the correct way. Guide slot.

For a printer with a paper thickness adjustment function, it is also important to adjust the position of the adjustment lever. When using different paper quality, the position of the paper thickness adjusting lever is also different. For example, when using a normal thickness of printing paper, the position value of the adjusting lever must be set to "0"; of course, different printers adjust the lever. Adjustment criteria are not the same, it is best to refer to the instructions.

Non-paper solution

First check if the installation of the printing paper meets the standards, for example if the loading position has exceeded the printer's left guide arrow mark. If it exceeds, the paper must be reduced.

Secondly, if there is any foreign matter inside the printer, for example, if a paper jam occurs in the printer, it will cause no paper feed; if there is foreign matter, we must exclude it, and when it is excluded, the printer power must be turned off first. Then carefully remove the foreign material; if you remove the paper, you must pull out the paper slowly in the paper exit direction. After removing the paper, check whether there is any residual paper, and ensure that the paper is also clean.

If the printing paper is used for a long time and the surface has a wet feeling, non-feeding may also occur. At this time, all we need to do is dry the printing paper; in addition, we must ensure that the surface of the printing paper is not curled or used. Fold phenomenon.

If you are using an inkjet printer, the black cartridge or color cartridge indicator flashes or lights up to indicate that the ink is nearly empty or has run out. If the cartridge is empty, the printer will not feed the paper and the corresponding new cartridge must be replaced before printing can continue.

Solution for printer paper jam

If printer jamming occurs, we should first look at whether the surface of the printing paper is flat. If paper curl or wrinkles occur, we should use a flat, smooth paper and ensure that the surface of the paper cannot have a similar adhesive. Class attachments. When loading paper into the paper slot, the paper should be fanned out in a fan-shaped manner to ensure that due to static electricity, multiple sheets of paper will stick together, causing printer jams.

It must be ensured that the weight of the printing paper used exceeds 60 g. If the printing paper is too thin, it will cause the printer to be very difficult to feed the paper and cause the printer to jam the paper. When installing the printing paper, we also need to check whether the printable side of the printing paper is placed down. If it is misplaced, it will cause the phenomenon of paper jamming; and ensure that the paper loaded at one time cannot be too thick. If you exceed the standard, you must reduce the amount of printing paper.

Once a paper jam occurs on the printer, we can try to use the “Feed/Eject” key to try to eject the jammed paper. If you cannot cancel the paper jam, you can manually take the paper out of the printer slowly. During the removal, the printer should be powered off as much as possible.