Multi-Fucntional Cabinet,Multifunctional Cabinet,Japanese Multifunctional Cabinet,Vintage Multi Drawer Cabinet Mexarts Household Products Co., Ltd. , https://www.mexartsglobal.com
Assembly clean room installation
**Clean Room Assembly Installation**
Article 2.5.1 The installation of the assembled clean room must be carried out in a fully completed and decorated space. The indoor environment should be kept clean, dust-free, and free from contamination. Throughout the construction and installation process, all parts and areas should be regularly cleaned and wiped to maintain hygiene standards.
Article 2.5.2 During the installation, the hanging structures, anchors, and other attachments must be securely fastened to the main structure, floor, and ceiling first. This ensures stability and prevents any movement during the assembly process.
Article 2.5.3 The floor surface must be smooth and even, with unevenness not exceeding 0.1%. When installing the wall panels, special attention should be given to the sealing at the junction between the floor and the vertical walls to ensure airtightness and prevent contamination.
Article 2.5.4 Before mounting the wall panels, the wiring should be carefully laid out, and the corners should be aligned vertically to avoid twisting or warping of the panels. The vertical deviation of the panels should not exceed 0.2%.
Article 2.5.5 The ceiling should be arched across the width of the room to maintain a flat surface under load. The edges of the ceiling must be tightly connected to the surrounding walls to ensure a seamless and airtight seal.
Article 2.5.6 During installation, the plastic protective film on the wall surfaces must remain intact. Avoiding impacts and foot traffic on the panels is crucial to prevent damage and maintain their structural integrity.
Article 2.5.7 All fittings and materials should be stored in a clean and dry area with proper support structures. They should be placed flat on a moisture barrier film to protect them from humidity and damage.
Article 2.5.8 Unpacking and opening of components should take place in a clean, controlled environment. Each part must be inspected for quality and integrity. Any damaged or substandard components must be rejected immediately.
Article 2.5.9 Before applying any surface coatings or sealants, the surface and grooves must be thoroughly cleaned to remove dirt, oil, and other contaminants. This ensures strong adhesion and prevents peeling or dust accumulation over time.
Article 2.5.10 All gaps between the assembled clean room panels must be sealed using high-quality sealant to maintain a sterile and controlled environment.
---
**BHC-1300IIA/B3 Biological Clean Safety Cabinet**
Bio-clean safety cabinets are essential in modern microbiology laboratories, especially where operator protection is critical. They are widely used in medical, pharmaceutical, and research settings to provide a safe, sterile, and dust-free workspace for bacterial cultures and sensitive experiments.
**Key Features:**
1. **Constant Airflow:** 100% exhaust airflow with negative pressure design ensures maximum containment.
2. **Adjustable Glass Door:** The glass door can be raised and lowered freely, with a height limit alarm for safety.
3. **Power Outlet:** A dedicated power outlet is available within the work zone for convenient use of equipment.
4. **High-Efficiency Filters:** Two layers of HEPA filters (99.999% efficiency) effectively remove particles, fumes, and microorganisms.
5. **Stainless Steel Construction:** Made from high-quality 304 stainless steel, the work area is seamless, easy to clean, and resistant to corrosion.
6. **LCD Control Panel:** The system is operated via an LED/LCD panel for easy monitoring and control.
7. **Filter Failure Alarm:** Alerts users when the high-efficiency filter needs replacement.
8. **Airflow Alarm:** Provides warnings if airflow levels fall below safe thresholds.
**Model:** BHC-1300IIA/B3
**Cleanliness Level:** Class 100 @ ≥0.5μm (US Federal 209E)
**Microbial Count:** <0.5 CFU/dish (90mm diameter culture plate)
**Noise Level:** ≤62 dB(A)
**Average Wind Speed:** 0.38 ± 0.025 m/s (work zone), 0.26 ± 0.025 m/s (front face), 0.27 ± 0.025 m/s (inlet)
**Vibration:** <5 μm (X, Y, Z directions)
**Illumination:** ≥300 LX
**Front Suction Wind Speed:** 0.55 ± 0.025 m/s
**Gas Leakage Rate:** ≤10â»â¶ m/s (under 500 Pa pressure)
**Power Supply:** AC, single-phase 220V/50Hz
**Max Power Consumption:** 600W
**Weight:** 350 kg
**Working Dimensions:** 1340 × 650 × 600 mm
**Overall Dimensions:** 1540 × 800 × 1950 mm
**HEPA Filter Size:** 1335 × 600 × 38 × 1 mm
**UV Lamp:** 16W × 2 / 15W × 2
[Image: BHC-1300IIA/B3 biological clean safety cabinet]
[Image: Shanghai Jing Net QR Code]