Common knowledge of wardrobe plates: analysis of advantages and disadvantages of different types of wardrobe plates

[ Chinese wardrobe net ] The wardrobe sheet is the board used to make the wardrobe, including the cabinet plate and the door panel. Common wardrobe plates are particle board, MDF, moisture-proof board, large core board, fir board, multi-layer solid wood board, Australian pine board, Ou Song board and so on. Today, the Chinese wardrobe net wardrobe plate common sense to explain, to bring you the advantages and disadvantages of different types of wardrobe plates, hurry to collect it.

Wardrobe sheet - particle board (also known as "solid wood particle board")

It is a kind of artificial board which is cut into a certain size by using wood or other lignocellulosic materials as raw materials, dried, mixed with adhesive, hardener and waterproofing agent, and pressed under heat, pressure and certain temperature.

Advantages: The inside is a granular shape with a cross-displacement structure, the performance in each direction is basically the same, and the lateral load-bearing capacity is good. In the production process, the amount of glue used is small and the environmental protection factor is relatively high. The surface is flat, the texture is realistic, the weight is uniform, the thickness error is small, the pollution is resistant, the aging is resistant, the appearance is beautiful, and various veneers can be performed. The finished product does not need to be dried again, it can be used directly, and the sound absorption and sound insulation properties are also good.

Disadvantages: The interior is granular and not easy to mill. The edge is rough, easy to absorb moisture, and it is easy to cause violent teeth when cutting the board. Therefore, some processes require higher processing equipment; it is not suitable for on-site production.

Wardrobe plate

Wardrobe sheet - MDF is also called "fibre board"

It is made of wood material such as trunk material, branch material or other plant fiber as raw material, hot-grinding (grinding into powder), sizing (urea resin or other suitable adhesive), drying and hot pressing after paving. Artificial boards.

Advantages: All kinds of veneer, adhesive film, veneer, light metal sheet and other materials can be glued on the surface of the MDF; various paints and paints can also be applied on the MDF, the effect is very beautiful. The hard MDF is punched and drilled, and can also be made into an acoustic board. The surface is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the shape is easy to avoid, causing problems such as decay and insects. Excellent physical properties, good nail holding power, uniform material, no dehydration problems.

Disadvantages: Do not prevent moisture, see the water will swell, long-term load and deformation.

Wardrobe sheet - large core board, also known as "blockboard"

It is made up of two pieces of veneer in the middle of the glue. The middle board is made of high-quality natural wood. After heat treatment, it is processed into a certain specification of wooden strips, which are made up of splicing machine. The spliced ​​wood boards are covered with two layers of high-quality veneers on both sides, and then pressed by a hot and cold press. The total thickness of the double-sided adhesive veneers of the large core board shall not be less than 3 mm. The corner defects of all kinds of large core boards shall not exceed 5mm in the nominal width and shall not exceed 20mm in length.

Advantages: good gripping force, high strength, quality, sound absorption, heat insulation, etc., and the water content is not high, between 10% and 13%, easy to process. The plate of the machine is subjected to a large pressing force, the gap is extremely small, the splicing is flat, the bearing capacity is uniform, long-term use, compact structure and deformation.

Disadvantages: Poor moisture resistance. Hand-made is to manually insert the wooden strip into the splint. The wooden strip is subjected to less pressing force, uneven splicing, large gap, poor nail holding force, and cannot be sawed and processed. It is only suitable for sub-projects of partial decoration. Such as the solid wood floor cushion board and so on.

Collar And Leash

Collar And Leash,Dog Leads And Collars,Dog Collars And Harnesses,Dog Collar And Leash Set

Wenzhou Vigorous Pet Products Co.,Ltd , https://www.vigorouspet.com