With the increasing number of complaints about housing and corresponding home improvement households, the Consumers Association reminds consumers that when purchasing such household items, beware of "super heavy metal in ceramic products", "unqualified moisture content in wood floors" and "solid wood doors" Sticking to the skin and other issues. For more information, please stay tuned to http:// Xianghe Furniture City official website Children handle Shenzhen Hongjingyuan Metal&Plastic Products Co., Ltd. , https://www.hjypull.com
Buy a home item and leave a few more eyes
Ceramic selection: beware of heavy metals exceeding the standard
When consumers buy ceramics on the market, they find that many ceramic products are similar. They may only have different colors, sizes and colors. It seems that no matter how you choose, as long as you can use them. In fact, when purchasing ceramic products, it is necessary not only to look at the glaze color, but more importantly, to pay attention to the heavy metal content of ceramic eating utensils. When purchasing, you should first look at the glaze color, whether the picture is clear, neat and shiny; whether the complete set of patterns is consistent, coordinated and matched; at the same time, the porcelain can be seen on the sunlight or the light, and the transparency is good. In addition, the most important point is that consumers pay attention to the lead content of ceramic eating utensils. The daily-use ceramic eating utensils are mostly decorated with flower surface, and most of them are decorated with glaze, mainly including glaze, glaze, underglaze and other decorative methods. Different decorative methods have large differences in the content of heavy metals such as lead and cadmium. For example, foods contained in products with excessive lead and cadmium content may cause lead to deposit in the blood, causing damage to the central nervous system, kidneys and other organs of the brain, and may also have adverse effects on the mental development of children and adolescents.
Choose solid wood doors to guard against "grain wood doors"
At present, in the decoration materials market, the price of the solid wood door market with similar appearance and shape ranges from about 1,000 yuan to several thousand yuan. The solid wood doors mentioned in the market are not all solid wood, and the difference between high-end and low-grade may only be "one layer of skin". According to industry insiders, the solid wood door on the market is strictly a modern wooden door. Due to cost and other reasons, when manufacturing modern wooden doors, the solid wood that consumers understand is generally only used for varieties and parts with less material, such as wood. Strips, edge seals and other small parts, and pine or imported filler material for the core of the door core, externally applied MDF and solid wood veneer, after high temperature hot pressing, also known as "solid wood composite door." The high-grade of the finished wooden door depends on the material of the solid wood skin. The pine, fir and eucalyptus are all relatively low-grade wooden doors. The high-grade solid wood has walnut, cherry, and Sapele. These high-grade veneer veneers are used. The doors are often expensive. Industry insiders reminded that there are many modern solid wood door finish materials. It is common to use veneer and stickers, but the grades are completely different. The wooden door of the sticker is called "grain wood door", which is easy to break, afraid of water, low price, and the solid wood door grade and price of veneer are relatively high. Therefore, when consumers buy modern solid wood doors, they must first figure out the skin that is attached to the outside.
Floor selection: Beware of the drying process but not off
Moisture content is the lifeline of wood. The wood for processing the floor must be degreased, dehydrated, and maintained (typed) to ensure the intrinsic quality of the floor. Under normal circumstances, the drying technology of large manufacturers can reach the standard, but some small manufacturers are prone to deformation, distortion, cracking, and insects due to the lack of equipment and technology.
Professionals pointed out that the floor where the problem occurred was mostly due to the drying process, and there was no such process at all. The moisture content of the floor was high, and it was deformed by the temperature in the dry season in the north. Therefore, professionals are reminded that when purchasing solid wood flooring, well-known brand products should be selected. If there is no accurate water content data reference when selecting, it is best to ask the quality inspection department for testing, and also choose two boards to knock each other, if the sound Clarity is basically in line with the requirements; if the sound is boring, most of them are unqualified.