Makeup Remove Cotton Cloth,Cotton Makeup Remove Cloth,Makeup Remover Cloth,Face Cleansing Cloths Fashiontex Industries Ltd , https://www.fashiontexjs.com
How to set the function key of the light constant incubator
The intelligent lighting constant temperature incubator is designed with several key components, including a top cover, working chamber, cooling and heating compartment, and a bottom chamber. These parts work in coordination to ensure precise temperature and lighting control. The operation interface offers a range of functions to customize the settings according to your needs. Here’s a detailed breakdown of the key controls:
1. **Cycle Number Key**: Press this button to switch between displaying the current cycle or the number of segments. To enter the cycle setting mode, press and hold for 2 seconds. To exit, press and hold again for 2 seconds.
2. **Set/Query Key**: Tap this button to enter the query mode, where you can check the current cycle number, set time, temperature, and humidity. Tap it again to exit. If you press and hold for 2 seconds, it will take you into the segment selection mode. After selecting the desired number of segments, tap the button to access the parameter setting mode. To exit the setting mode, press and hold the button for 2 seconds. Note: If the cycle is set to 0 and the first cycle is also 0, the first program will always run.
3. **Decrease Button**: During parameter setup, pressing this button decreases the selected value by one. Holding it down allows for continuous decrement.
4. **Increase Button**: This button increases the value by one when tapped. Holding it for a few seconds causes the value to increase continuously.
5. **Return (Back) Button**: Used during parameter settings for each segment, this button lets you navigate back to the previous parameter within the same segment only.
6. **Temperature Parameter Button**: Press and hold for 2 seconds to access the internal parameter settings. Tap once to adjust internal settings and press again for 2 seconds to exit.
7. **Lighting Button**: Tap this button to turn on the internal lighting inside the incubator.
8. **Power Button**: This button powers the controller on or puts it into shutdown mode. If no buttons are pressed for 30 seconds while in any setting mode, the system will automatically return to normal operation.
This user-friendly interface ensures accurate control over both temperature and lighting conditions, making it ideal for laboratory and research applications. Whether you're running a single cycle or multiple programs, the incubator provides flexibility and precision for your experiments.