Design printed handkerchief,Cotton pattern handkerchief,Cotton printed handkerchief,Digital Printed Handkerchiefs Fashiontex Industries Ltd , https://www.fashiontexjs.com
How to set the function key of the light constant incubator
The intelligent lighting constant temperature incubator is designed with several key components, including a top cover, a working chamber, a cooling and heating compartment, and a bottom chamber. These parts work in harmony to ensure precise temperature control and optimal illumination management. The operation settings are as follows:
1. **Cycle Number Key**: Press this button to switch between displaying the current running cycle or the number of segments. To enter the cycle setting mode, press and hold the button for 2 seconds. To exit, press and hold it again for 2 seconds.
2. **Set/Query Key**: Click to enter the query mode, where you can view the current cycle number, set time, temperature, and humidity. Press the same button again to exit. If you press and hold it for 2 seconds, you will enter the segment selection mode. After choosing the number of segments, click the button to access the parameter setup. To exit the parameter setup, press and hold the button for 2 seconds. Note: If the cycle is set to 0 and the first cycle is also 0, the first program will always run.
3. **Decrease Button**: During parameter setup, pressing this button decreases the value by one. Holding it down allows continuous reduction of the value.
4. **Increase Button**: When adjusting parameters, clicking this button increases the value by one. Holding it enables continuous increment of the value.
5. **Return (Back) Button**: In the parameter setup for each segment, this button allows you to go back to the previous parameter within the same segment.
6. **Temperature Parameter Button**: Press and hold this button for 2 seconds to access the internal parameter settings. Clicking it allows you to adjust these parameters, and pressing it again for 2 seconds exits the setting mode.
7. **Lighting Button**: Click this button to turn on the internal lighting inside the incubator.
8. **Power Button**: This button starts or stops the controller’s operation. If no buttons are pressed for 30 seconds while in any setting mode, the system will automatically return to normal operation.
The device is ideal for laboratory environments that require consistent temperature and light conditions for experiments. Whether you're growing plants, cultivating cells, or conducting biological research, the incubator ensures accurate and reliable performance. With its intuitive interface and user-friendly controls, it's easy to configure and operate, making it a valuable tool for any scientific application.