Stamping machine die-cut adhesive

In the absence of adhesive printing and die-cutting machines, we used a TY615 platform printing machine to print and die-cut self-adhesive labels, and achieved satisfactory results. The introduction is as follows for your colleagues' reference.

Printing: Same as paper thickness printing. Our printed area is 190-270mm. Due to the factors of die-cutting pressure, whether large-area printing can be further researched-
Die cutting: We use a 5mm thick 7-layer plywood for wooden support, and a knife with an imported knife of 9.5-0.45mm.

Pad thickness: The thickness of the pad under the plate is determined by the height of the die cutter used. Since the height of the platen of the printing press is 23.44mm, the horn thickness = 23.44-knife height (mm). We use a polished 13.5mm thick iron plate. Lining thickness: Same as printing, except that when the die is cut, the outer liner is replaced with a layer of waste PS aluminum, and the total thickness is 1.2mm.


The die-cut version is fixed on the horn with four M6 countersunk screws.

The adjustment of the die-cutting pressure is to increase or decrease the sheet under the horn to adjust the pressure so as to achieve the goal of half-cutting.


Source: Shenzhen self-adhesive web

Baking Spatula

Baking Spatula,Baking Tools,Silicone Baking Spatulas,Food Garde Baking Spatula

RealSheen Lifestyle Enterprise Limited , http://www.realsheen.com