Industrial dust collector cleaning tips

With the rapid development of the economy, industrial dust collectors have been used in factories of all sizes to clean up all kinds of dust and rubbish generated during the work. This not only reduces the workload of staff, but also greatly reduces the chance of workers suffering from occupational diseases. , However, after the dust collector runs for a period of time, there will be an accumulation of dust at the bottom of the filter bag. The accumulation of dust is all precipitated by the operator when the dust is removed. What should we do if we want to make it simple without wasting too much labor to clean up the dust from the dust collector?

The following points are some of the methods that Shanghai Yibo Industrial Co., Ltd. dedicate to customers. We hope to help those who need it:

1. Gas cleaning: Gas cleaning is the use of high-pressure gas or external atmosphere to blow the filter bag to remove dust on the filter bag. Gas cleaning includes pulse jet cleaning, reverse blow cleaning, and reverse suction cleaning.

2, mechanical vibration cleaning ash: the top of the rapping dust and the central raid cleaning (in terms of filter bags), is the use of mechanical rapping device periodically beat the rows of filter bags in order to remove the filter Dust on the bag.

3. Manual tapping: Each filter bag is manually beaten to remove accumulated dust on the filter bag. After the operator completes the work, the ash cleaning work should be done in time to avoid accumulation of excessive dust on the industrial dust collector.

4. Air box pulse cleaning method: also called forced pulse method, which is characterized by dividing the filter bag into several chambers. The filter box is divided into several parts by a partition in the net air box above the filter bag. The upper part of the filter bag is not tube. Ash removal is carried out in a sequence of chamber-by-room operations. The exhaust valve is closed and the pulsed air stream is injected from one side to the upper part of the sub-compartment. The sub-compartment enters each filter bag and uses its impact and expansion to remove dust.

5、Reverse blowing vibration combined with cleaning method: refers to the combined cleaning method with weak vibration when dust can not be fully cleared only by the method of back blowing cleaning, high temperature glass fiber filter bags actually use this combination of clear Gray way.

Each product of Shanghai Yibo Industrial Co., Ltd. is designed by the industry's senior engineers, adhering to the concept of high quality, high efficiency, low energy consumption, humane, and low cost, so as to meet the user's needs and create a cleaner for the user. Work environment, welcome customers to inquire.